Burbank splits into two kinds of pool jobs: postwar tract pools on the flats, and hillside pools tucked above Sunset Canyon. Pool renovation in Burbank usually means bringing a 1950s or 1960s backyard up to modern equipment and finishes. This page covers what we renovate here, what it costs and how the two halves of the city differ.
Who Renovates Pools in Burbank?
Spear Pool Equipment & Repair renovates, resurfaces and repairs pools across Burbank, from a failed pump on the flats to a full remodel on a hillside lot. The company is licensed under CSLB #1143895, pulls permits through the City of Burbank, and gives a free written estimate before work starts.
Repair, Resurface or Renovate?
Almost every Burbank call is one of three jobs. This is how we sort them on the first visit:
| Option | What you are seeing | Cost | How long it holds |
|---|---|---|---|
| Repair | One failed part, a leak, a cracked tile or two | $243 to $1,212 typical | Buys years on a sound shell |
| Resurface | Rough or stained finish, plaster past 10 years | $6,000 to $15,000 | 5 to 10 yrs plaster, 20+ pebble |
| Renovate | Original finish, coping and equipment together | Quoted per project | Resets the whole pool |
Pool Work We Handle in Burbank
The shell and the equipment pad age on different clocks, and on pools this old both are usually due.
Our pool remodel services cover finishes, tile, coping and decks, while the pad is its own job and often the more urgent one.
Resurfacing, Plaster and Tile
A finish that feels rough or holds stains has run out of life. We handle new pool finishes in plaster, quartz or pebble, and we tell you which one fits how long you plan to stay.
| Finish | Lifespan | Upfront cost | Best for |
|---|---|---|---|
| Plaster | 5 to 10 years | Lowest | A straight refresh on a budget |
| Quartz | 15 to 20 years | Middle | Longer life without pebble pricing |
| Pebble | 20+ years | Highest | Pools kept for the long term |
Lifespans from HomeAdvisor and finish makers Pebble Technology International and SGM. Plaster is quoted at 5 to 10 years by cost guides and 7 to 10 by manufacturers, and water chemistry decides where a pool lands in that range.
Hard Valley water leaves a chalky band at the waterline, so pool retiling usually goes in while the pool is drained.
Thinking about resale? Our guide on how pool remodeling affects home value covers what pays off.
“Very pleased with Mike and the Spear team. Highly recommend Mike and his team for anyone looking to upgrade pool equipment, relocate equipment, new installs and much more.”
★★★★★ Scott Law, San Fernando Valley, verified Google review
Flats and Hillside: Two Different Decks
On the flats, decks fail from age and sun: cracked slabs, lifted coping and joints last sealed decades ago.
Above Sunset Canyon the cause changes. Slope movement pulls decks away from the pool, so we check drainage before quoting pool coping work. Sound slabs then get pool deck refinishing.
“Spear were professional from beginning to end. They came out the next day, when I said it was really urgent.”
★★★★★ Rupert Thorpe, Los Angeles, verified Yelp review
Equipment, Plumbing and Automation
Most repair calls start at the pad, which is our equipment and pad work. We handle pad repairs on the brands common in these backyards.
When a single-speed pump finally quits, fitting a new variable-speed pump pays back over Burbank’s long, hot summers. Adding automation means pool electrical service for the panel and controls.
Water loss with no crack in sight points underground. We locate it and handle underground leak repair. When the old lines keep failing we replace the lines.
Remodels, Spas and New Pools
A dated interior is the moment to price new plaster with tile and coping.
Families ask for a tanning shelf for shallow lounging.
For year-round use we handle building in a spa on shared equipment.
Waterfalls and fire bowls are backyard pool features, easiest while the deck is open.
On an empty lot, we handle concrete pool construction from permits through start-up.
Get a Free Burbank Pool Estimate
Tell us what the pool is doing. Estimates are free, and most repairs are scheduled the same week.
Free visit. Written price. No obligation.
Burbank Pools by the Numbers
- About $95,393 is what a pool adds to a typical Los Angeles home, the highest of any major U.S. metro in Redfin’s 2019 study. Condition is what decides whether you see it at sale.
- $6,000 to $15,000 is the range for full resurfacing, averaging about $11,000, per HomeAdvisor’s 2026 data. Tract-sized Burbank pools usually sit in the middle of that band.
- Permits come from the City of Burbank, not LADBS, so inspections and timelines differ from a job across the hill in the Valley.
Neighborhoods and Local Conditions in Burbank
We service pools across Burbank: the flats around Magnolia Park, the streets off Glenoaks and Olive, the Rancho equestrian district, and the hillside properties above Sunset Canyon.
The flats were built out in the postwar years, so the pools there are mostly original shells with equipment that has been replaced piecemeal over decades.
Heat is the constant. Long summers keep pumps running for hours a day, which shortens motor life and drives up the cost of an old single-speed unit.
“They booked our appointment showed up on time and sent us an amazing technician. He reviewed our entire pool install and was very thorough and knowledgeable.”
★★★★★ Tommy Creed, San Fernando Valley, verified Google review
What Drives the Price of Pool Work in Burbank
Two similar-looking Burbank pools can quote very differently. These factors explain most of it:
- Flat or hillside. Slope work adds drainage and deck correction.
- What the pad already has. A modern pump and filter cut the scope considerably.
- Hidden damage. Hollow spots and old plumbing appear only after draining.
- Permits. City of Burbank review runs on its own schedule.
| Job | Typical range |
|---|---|
| Pump motor repair | $50 to $300 |
| Heater repair | $160 to $730 |
| In-ground leak repair | $350 to $2,700 |
| Full resurfacing | $6,000 to $15,000 |
| Typical repair, all types | $243 to $1,212 |
National ranges from HomeAdvisor 2026 cost data. Burbank quotes depend on access and what we find once the pool is drained.
Many owners add renovation work that makes a pool safer at the same time.
“Diagnosed the problem efficiently and quickly, and came back the very next day with the part and installed it in minutes.”
★★★★★ Valerie M., Woodland Hills, verified Yelp review
Meet the Owner
Ran Neuman owns Spear Pools, Inc. and brings 18 years of hands-on pool repair and construction experience.
On remodels he meets the homeowner, explains each step and stays involved from demolition through start-up. Connect with Ran on LinkedIn.
Read what customers across the Valley say on our Google Business Profile.
“Damian has been repairing out pool equipment for many years. He is the best.”
★★★★★ Victor Kenton, San Fernando Valley, verified Google review
Nearby Areas We Serve
South over the hill, the canyon streets share Burbank’s slope problems, and we cover Studio City pool renovation there.
West along the 134 we work throughout Toluca Lake. East, homeowners call us for pool service in Glendale.
The complete service area list shows every city we cover.
Frequently Asked Questions
What is the average pool repair cost?
The average pool repair cost is about $725, with most repairs falling between $243 and $1,212, according to HomeAdvisor’s 2026 data. Heater repairs run $160 to $730 and pump motors $50 to $300. In-ground leaks range from $350 to $2,700 because finding the leak takes longest. Older Burbank pools often turn up a second issue once we open the pad, so we quote in writing first.
Do you need a permit to replaster a pool in California?
Yes, replastering generally requires a permit, and in Burbank it comes from the City of Burbank rather than LADBS, so the process differs from a job in Los Angeles. The pool must also meet the California Swimming Pool Safety Act, which covers drowning prevention features. Requirements vary city to city across the county. Spear pulls the permit as part of the job.
What is the average cost of pool maintenance in Los Angeles?
Pool maintenance in Los Angeles is usually quoted monthly and varies with pool size and service frequency, which is why published ranges differ so widely. Repairs are the costs worth planning for: HomeAdvisor’s 2026 data puts a typical repair at $243 to $1,212. We handle repair and renovation rather than weekly cleaning, so we can tell you what your equipment will cost to keep running.
What is the most expensive part of a pool?
The shell and its finish are the most expensive part of a pool to put right. A full resurfacing runs $6,000 to $15,000 per HomeAdvisor’s 2026 data, far beyond any single equipment repair. Heaters are the priciest item on the pad at $160 to $730 to repair. That gap is why we always check whether the shell is sound before recommending new equipment.
What is the average lifespan of a pool?
A well-built concrete pool shell lasts decades, but the finish on it does not. Plaster lasts 5 to 10 years, quartz 15 to 20 and pebble over 20, according to HomeAdvisor and the finish manufacturers. Equipment runs shorter still, with pumps and heaters typically replaced every 8 to 12 years. Most Burbank pools we see are on their second or third finish.
Ready to renovate or repair your Burbank pool? Call (818) 719-9059 and Ran will look at the pool, equipment and deck together.
